AcerPower F2 User’s Guide
Copyright © 2004 Acer Incorporated All Rights Reserved AcerPower F2 User’s Guide Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
System Tour Front panel Rear panel System Features Performance Multimedia Connectivity System peripherals Mouse(PS/2 or USB, manufacturing option) Keyboard(PS/2 or USB, manufacturing option) Speakers System upgrade Open the computer Set up new components Setting up your computer Necessary to know before Setup Select location Open package Connecting the peripherals Starting your computer Shutting down your computer iv 1 1 2 3 3 3 3 4 4 4 5 5 6 6 7 7 7 7 8 9 9 Troubleshooting 11 Taking Care of your com
TBR 21 Notice for Australia Important safety instructions Macrovision® copyright protection notice Lithium battery statement Laser compliance statement Declaration of Conformity for CE marking Federal Communications Comission Declaration of Conformity 19 19 19 21 21 22 23 24 Macrovision® copyright protection notice This product incorporates copyright protection technology that is protected by method claims of certain U.S.
1 Your computer’s front panel consists of the following: Front panel No. Description No.
English 2 System Tour Rear panel 1 2 3 4 5 6 7 8 9 10 13 11 12 14 No. Description No.
3 Your computer features: Performance • Intel® Pentium® 4/Celeron® CPU • System Memory DDR 266/333/400, 2 DIMM Slots, expandable to 2GB • Power management function • 3.5 inch floppy drive • CD-ROM, DVD-ROM, CD-RW (52X/24X), DVD/CD-RW combo or DVD writer • High-capacity, Enhanced-IDE drive • Support USB 2.
English 4 System Tour System peripherals The AcerPower F2 computer consists the system itself, and system peripherals, like a mouse, a keyboard and a set of speakers (optional). This section provides a brief description of basic system peripherals. Mouse(PS/2 or USB, manufacturing option) The included mouse is a standard two-button wheel mouse. Connect the mouse to the PS/2 mouse port or USB port on the back panel of the system.
5 For systems bundled with speakers, before powering on the system, connect the speaker cable to the audio out (external speaker) port on the back panel of the system. For more detailed information about the speakers, please refer to the included operating instructions. Note: speakers are optional and the appearance might be different depending on the actual product. System upgrade You can expand your AcerPower F2 system quickly and easily by adding components.
English 6 System Tour Open the computer Before removing any panels or covers, please make sure to shut off the computer and unplug the power cord from the outlet. • Remove the two screws on the side panel. • Slide the panel back and off. Set up new components You can only use components compatible with AcerPower F2 computers. Before you choose new components, please ask your authorized Acer dealer whether the part will operate within your AcerPower F2 system.
7 AcerPower F2 is a versatile, high-power system, supporting Intel® Socket 478 CPUs. The computer uses PCI (Peripheral Component Interface) and AGP (Accelerated Graphics Port) design. This improves system efficiency and helps the system support varied multimedia and software applications.
English 8 Setting up your computer Ensure that all items are present and in good condition. If any of the following items are missing or appear damaged, contact your dealer immediately. • AcerPower F2 Series • PS/2 or USB keyboard (manufacturing option) • PS/2 or USB mouse (manufacturing option) • Spearkers (for selected models only) • User's Manual and Starter poster Other user documentation and third party software.
9 After connecting all the peripheral equipment, start your computer according to the below steps: 1 Power on all peripheral equipment, such as monitor, printer, fax, speakers etc. 2 Turn on the system. Once the start-up process is complete, you can begin to use the computer. Shutting down your computer From the "Start" Menu, select "Shut Down" and click OK. In the event of a system crash, press and hold the power button on the front of the system for four seconds.
English 10 Setting up your computer
11 The following questions are possible situations that may arise during the use of your computer and each is followed by simple answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located above the power switch. If the LED is not lit, no power is being applied to the system. Do any of the following: • Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage.
English 12 Troubleshooting Q: The printer does not work. A: Do the following: • Make sure that the printer is connected to a power outlet and that it is turned on. • Make sure that the printer cable is connected securely to the system's parallel port and the corresponding port on the printer. • For additional information concerning the printer, refer to the printer's documentation. Q: No sound comes out from the speakers. A: Check the following: • The volume may be muted.
13 Make sure that you are using the correct type of diskette. Check if the diskette is formatted correctly. If not, format it again. Caution: If you reformat a diskette, you will lose any data on it.
English 14 Troubleshooting
15 Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. • Do not subject the computer to magnetic fields. • Do not expose the computer to rain or moisture. • Do not spill water on the computer. • Do not subject the computer to heavy shock or vibration.
English 16 Taking Care of your computer To clean your pointing device To clean your mouse (with rubber ball) 1 Open the circular cover underneath the mouse. 2 Take out the rubber ball and wipe it with a soft, damp cloth. 3 Put the ball back and replace the cover. To clean your optical mouse For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions. To clean your monitor Make sure that you keep your screen clean.
17 As an Engery Partner, Acer Inc., has determined that this product meets the Energy Star guidelines for energy efficiency. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
English 18 Use conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
19 TBR 21 This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact your equipment supplier in the first instance.
English 20 8 If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. 9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
21 This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Apparatus Claims of U.S. Patent Nos.
English 22 ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive’s classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
23 Name of Manufacturer: Acer Inc. Address of Manufacturer: 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan, R. O. C.
English 24 Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
