Technical information

Chapter 3 51
Removing the 3G Module
1. See “Removing the Lower Cover” on page 47.
2. Disconnect the two (2) antenna cables from the 3G board and remove the two (2) screws to release the 3G
board.
NOTE: Cable placement is as follows: Main (yellow) is closest to WLAN card, Aux (blue) is closest to
HDD.
3. Detach and remove the 3G board from the 3G socket.
Step Size Quantity Screw Type
3G Board
Disassembly
M2.0*4.0 2