User Guide

Setup Utility
User’s Guide 53
BOOT FROM CD-ROM
Setting Description
Enabled The computer checks for a bootable CD in the CD-ROM.
If a CD is present, the computer boots from the CD-ROM.
Otherwise, it boots from the drive specified in the System
Boot Drive parameter.
Disabled The computer boots from the drive specified in the
System Boot Drive parameter.
Onboard Communication Ports
SERIAL PORT 1 BASE ADDRESS
This parameter allows you to set the serial port 1 logical
base address.
Setting Description
3F8h Serial port 1 with address 3F8h using IRQ4
2F8h Serial port 1 with address 2F8h using IRQ3
3E8h Serial port 1 with address 3E8h using IRQ4
2E8h Serial port 1 with address 2E8h using IRQ3
Disabled Disables serial port 1
FAST IR MODE
This parameter allows you enable or disable Fast IR (Fast
Infrared or FIR) mode. If you are using the wireless
keyboard, optional remote control or other infrared devices,
set this parameter to
Enabled
. When Fast IR Mode is
enabled, it occupies the serial port 2 base address.