User guide

4 Networking Switch Modules
376
Port Settings
Clicking the PORT SETTINGS tab brings up the LA PORT SETTINGS page,
which configures LA properties at a per-port level. The parameters for
this page are shown in the following table.
Parameter Description
Port This parameter specifies the Interface Index.
Port Priority This parameter specifies the priority value of the Port.
Mode This parameter specifies whether the Port LACP activity
is
Active or Passive .
Port Channel This parameter specifies the identifier of the port
channel interface.
Timeout This parameter sets the time within which LACP PDUs
must be received on a port to avoid timing out of the
Aggregated Link. If a
Long timeout is chosen then the
ports will time out of the Port Channel in 90-seconds. If
a
Short timeout is chosen then the ports will time out
of the Port Channel in 3-seconds.