User guide

369
Port Configuration
Clicking the PORT CONFIGURATION tab brings up the CIST SETTINGS page,
which sets the configuration per Port related to MSTP. The parameters
for this page are shown in the following table.
Parameter Description
Port This parameter specifies the port identifier.
Admin Status This parameter specifies the MSTP protocol status that
can be enabled/disabled on the particular port.
Priority This parameter specifies the port priority used in role
selection.
Path Cost This parameter specifies the path cost associated with
this port.
Protocol Migration This parameter controls the migration among MSTP,
RSTP and STP protocols, if the other side of the switch
runs a different mode. Migration takes place only if
this is enabled.