User guide

361
RSTP Basic Settings
Clicking the BASIC SETTINGS tab brings up the RSTP CONFIGURATION page,
which displays the various parameters for RSTP configuration. The
parameters for this page are shown in the following table.
Parameter Description
System Control This parameter allows you to start or shutsdown RSTP
in the switch.
RSTP Status This parameter allows you to enable/disable the
protocol at a global level on the switch.
Compatibility This parameter allows you to choose to run the
protocol as an RSTP or STP compatible version.
Bridge Priority This parameter specifies the B
RIDGE PRIORITY, which can
be used to select the root bridge.
Transmit Hold
Count
This parameter specifies the maximum number of
packets that can be sent in a given interval. This is
configured to avoid flooding.