User Guide

6 Select Duplex Mode.

Figure 53 Controller Properties Dialog Box: Expert: Duplex Mode Dialog Tab

In the Duplex Mode Tab, you have the following options:

Report busy status during failback:When enabled, causes all pending commands to be quietly dropped during

failback. This is intended to help hosts that are confused by Queue Full.

Note: A controller reset is required to make a change to this option take affect.

Enable auto restore: The default is disabled. When enabled in a dual-active controller system, Automatic

Restore allows automatic recovery of a partner controller when a replacement is

inserted.

Note: A controller reset is required to make a change to this option take affect.