User Guide

© 2003, Adaptec, Inc. 191
4Click OK.
To locate an enclosure, select the enclosure in the navigation area and select Locate from the Enclosure pull-down
menu.
7.8 Updating a Controller’s Firmware
The firmware update utility is used to update firmware by “flashing” the new code stored in a specified .ima file to the
on-board flash memory. As maintenance releases of the firmware become available, this utility allows you to keep your
controller current.
Note: Updating controller firmware requires the controller to reboot.
Use the following steps to perform a firmware update.
1Click Controller->Update Firmware from the menu bar.
Figure 103 Update Firmware Password
A Warning dialog box displays telling you that a password is required to initiate a firmware update.