User Guide

© 2003, Adaptec, Inc. 19
(Many Linux environments will automount the CD drive.)
5 Locate the CDROM and find the setup.bin file in the following path:
/ssd/linux/setup.bin
6 Like Windows, there are several ways to run a program. Here are two methods:
Browse using a file manager to:
/mnt/cdrom/ssd/linux
Double click on setup.bin
In a console window, type:
cd /mnt/cdrom/ssd/linux
type:
./setup.bin
7 The InstallShield Wizard starts and the Spheras Storage Director Installer Welcome screen opens. Proceed to 2.3
Server and Client Installation Procedures on page 19.
2.2.1.2 Solaris SPARC
You need to be in the X Windows Environment to install Spheras Storage Director with Solaris SPARC. To install the
Spheras Storage Director Server with Solaris SPARC, follow these steps:
1 Open your Common Desktop Environment.
2 Insert the CD-ROM into your CD-ROM drive.
3 Login as root.
4 Mount the CD. (Many Solaris environments have auto mounting so you may not have to complete this step.)
mount -F hsfs /dev/sr0 /mnt
5 In a console window, type:
cd cdrom/ssd/solaris
6 Type:
./setup.bin
7 The InstallShield Wizard starts and the Spheras Storage Director Installer Welcome screen opens. Proceed to the
2.3 Server and Client Installation Procedures on page 19.
2.3 Server and Client Installation Procedures
Note: During the install process, the InstallShield Wizard checks the following on your system:
• That a supported operating system is used
• That there is sufficient disk space for the installation
• That the user has administrator privileges on the system
• That services for any previous installations of Spheras Storage Director have been stopped
Error messages are posted if the system fails any of these checks. The dialogs for these messages are not shown in this
section.
In this section, the screens that are shown are from a Windows system. The screens from all other operating systems are
similar with the exception of the paths and path delimiters.