User Guide

© 2003, Adaptec, Inc. 159
320 Name MLXEV_ENCLFAN_FAILED
Description Fan failure.
Cause Cable connection broken.
Fan failure
Action Replace fan.
Address ctl: 0 enclosure: 13 unit: 14
Severity 1 (Serious)
Source ExPro InPro
321 Name MLXEV_ENCLFAN_OK
Description Fan has been restored.
Cause Faulty fan has been replaced.
Cable is connected properly.
Action None
Address ctl: 0 enclosure: 13 unit: 14
Severity 4 (Information)
Source ExPro InPro
322 Name MLXEV_ENCLFAN_NOTPRESENT
Description Fan is not present.
Cause Enclosure management connection is broken.
Management hardware failure.
Fan is not present.
Action Refer to enclosure manufacturer’s service manual.
Address ctl: 0 enclosure: 13 unit: 14
Severity 2 (Error)
Source ExPro InPro
323 Name MLXEV_ENCLPOWER_FAILED
Description Power supply failure.
Cause Broken cable connection.
Power supply failure.
Action Refer to enclosure manufacturer’s service manual.
Address ctl: 0 enclosure: 13 unit: 14
Severity 1 (Serious)
Source ExPro InPro
324 Name MLXEV_ENCLPOWER_OK
Description Power supply has been restored.
Cause Faulty power supply has been replaced.
Action None
Address ctl: 0 enclosure: 13 unit: 14
Severity 4 (Information)
Source ExPro InPro
325 Name MLXEV_ENCLPOWER_NOTPRESENT
Description Power supply is not present.
Cause Enclosure management connection is broken.
Management hardware failure.
Power supply is not present.
Action Refer to enclosure manufacturer’s service manual.
Address ctl: 0 enclosure: 13 unit: 14
Severity 4 (Information)
Source ExPro InPro
Table 2 RAID Controller Event Codes