User Guide

© 2003, Adaptec, Inc. 139
46 Name MLXEV_PHYSDEV_NOTRDY_DEAD
Description A physical disk failed because device is not ready.
Cause Physical disk not spinning, just turned bad.
Power to the physical disk failed.
Action Replace physical disk and rebuild it.
Check power and rebuild device.
Address ctl: 0 chn: 13 tgt: 14
Severity 1 (Serious)
Source InPro
47 Name MLXEV_PHYSDEV_MISSING_DEAD
Description A physical disk failed because the physical disk was not found on start
up.
Cause Physical disk not connected.
Physical disk not responding.
Clear configuration suspend mode command was invoked.
Action Check setup.
Check the startup option parameters on the system.
Address ctl: 0 chn: 13 tgt: 14
Severity 1 (Serious)
Source InPro
48 Name MLXEV_PHYSDEV_CODWRFAIL_DEAD
Description A physical disk failed because write operation of the 'Configuration On
Disk' failed.
Cause Failed physical disk.
Device write protected.
Action Replace physical disk and rebuild it.
Check the startup option parameters on the system.
Address ctl: 0 chn: 13 tgt: 14
Severity 1 (Serious)
Source InPro
49 Name MLXEV_PHYSDEV_BDTWRFAIL_DEAD
Description A physical disk failed because write operation of 'Bad Data Table'
failed.
Cause Failed physical disk.
Device write protected.
Action Replace physical disk and rebuild it.
Check the startup option parameters on the system.
Address ctl: 0 chn: 13 tgt: 14
Severity 1 (Serious)
Source InPro
50 Name MLXEV_PHYSDEV_OFFLINE
Description Physical disk status changed to offline.
Cause –
Action None
Address ctl: 0 chn: 13 tgt: 14
Severity 2 (Error)
Source ExPro
51 Name MLXEV_PHYSDEV_STANDBY
Description Physical disk status changed to Hot Spare.
Cause –
Action None
Address ctl: 0 chn: 13 tgt: 14
Severity 4 (Information)
Source ExPro
Table 2 RAID Controller Event Codes