User Guide

136 Spheras Storage Director Installation and User Guide
26 Name MLXEV_PHYSDEV_ACTIVESPARE
Description Active spare found.
Cause Physical disk was configured.
Manual active spare was done.
Automatic active spare was done
Action None
Address ctl: 0 chn: 13 tgt: 14
Severity 4 (Information)
Source InP_old
27 Name MLXEV_PHYSDEV_WARMSPARE
Description Warm spare found.
Cause Physical disk was configured.
Manual warm spare was done.
Automatic warm spare was done.
Action None
Address ctl: 0 chn: 13 tgt: 14
Severity 4 (Information)
Source InP_old
28 Name MLXEV_PHYSDEV_REQSENSE
Description Request sense data available.
Cause A physical device reported an error.
Firmware reported an operational error.
Action Read the request sense data to understand the root cause.
Address ctl: 0 chn: 13 tgt: 14
Severity 2 (Error)
Source InPro
29 Name MLXEV_PHYSDEV_INIT_STARTED
Description Initialization started.
Cause Host started the initialization.
Action Wait until the initialization is completed. If the system is shut down
before initialization is completed, the physical device can be made
useful only by reinitializing it.
Address ctl: 0 chn: 13 tgt: 14
Severity 4 (Information)
Source InPro
30 Name MLXEV_PHYSDEV_INIT_DONE
Description Initialization completed.
Cause Physical device initialization completed successfully.
Action None
Address ctl: 0 chn: 13 tgt: 14
Severity
Source InPro
31 Name MLXEV_PHYSDEV_INIT_FAILED
Description Initialization failed.
Cause Physical device could have problems supporting the SCSI format
command.
Action Try to initialize again.
Contact your service representative.
Address ctl: 0 chn: 13 tgt: 14
Severity 2 (Error)
Source InPro
Table 2 RAID Controller Event Codes