User Guide

• The host access of each logical drive.

• The capacity or each logical drive.

• The status of each logical drive.

• The RAID level of each logical drive.

• Whether write back cache is enabled or disabled for each logical drive.

• The stripe size of each logical drive.

• The array number where each logical drive resides.

Click on an individual logical drive to view its information.

6.6 Monitoring an Enclosure

To monitor activities on an enclosure, select an enclosure from the navigation area. There are three ways to view

enclosure information.

• Select the Enclosures icon in the navigation area and view the information in the content area

• Select an individual enclosure in the navigation or content area and view the information in the content area

• Click Enclosure->Properties from the menu bar.

Figure 92 Displaying Enclosure Information

If you are displaying the information using the Enclosures icon, the content area displays general information about the

enclosure including name (enclosure ID number), status, type of enclosure, number of slots, and enclosure vendor. The

enclosure status that is reported is the most severe status of the enclosure itself or of the enclosure elements.

To view information about an individual enclosure, select an individual enclosure in the navigation area.