User Guide

• The ANSI version supported

• Whether the following parameters are set to Yes or No: Linked Commands, and Command Queuing

• The maximum data transfer width (in bits)

6.5.2 Displaying Logical Drive Information

To monitor activities on a logical drive, select a logical drive from the navigation area.

Figure 90 Displaying Logical Drive Information (text view)

The content area displays the logical drive information.

In the text view, the following information is displayed about the logical drive.

• The logical drive number

• The Host Access - displays Enabled, None, or Custom

• The capacity of this logical drive

• The operational status of this logical drive

• The RAID level at which the logical drive is configured

• The status of the write back cache (enabled or disabled)

• The stripe size in use by the logical drive

• The array number where the logical drive resides.

In the physical view, the following information is displayed:

• The LUN number

• The status of the host access (enabled or disabled)

• The capacity of this logical drive

• The status of the logical drive

• The RAID level of the logical drive

• The array number where the logical drive resides

• The drive status of physical drives within the logical drive..