User Guide

116 Spheras Storage Director Installation and User Guide
Figure 85 Displaying Array Information (physical view)
The content area displays array information either in the Text View or the Physical View. Both views contain the
following information:
• The array number.
• The number and total capacity of the logical drives defined on the array.
• The number and total capacity of the physical drives on the array.
• The status of components in the array.
Note: In the Physical View shown in
Figure 85 Displaying Array Information (physical view) on page
116 there are drives shown with a status of Not Selected. This simply means that these drives are not part of
the array that is being viewed.
To view Array Properties, click Array->Properties from the menu bar.
The Array Properties dialog box opens and displays the following information: