User Guide

© 2003, Adaptec, Inc. 105
In the navigation area, right-click on the Array that you want to delete or select Array->Delete from the menu.
Select Delete.
The Delete an Array Warning dialog box opens.
Figure 72 Delete an Array
Type your Administrative password in the password field.
Click OK. The array and its contents are deleted.
5.10 Restoring a Controller Configuration from a Previously Saved File
Restoring a configuration downloads a previously-saved controller configuration from a file on the server to the
controller. It also provides you with both data recovery and identical system stamping that insures the logical drives and
hot spares are defined in the same manner as the original system. The configuration is restored only if the physical disks
are of equal or greater size and residing in the same slots and on the same channels. Do the following to restore a
controller configuration:
Click Controller->Restore Controller Configuration as shown in Figure 73 Restore Controller Configuration on page
106.