User Guide

104 Spheras Storage Director Installation and User Guide
Figure 71 Manual Storage Configuration: Expand Logical Drive
Select which physical drives you want to add to the Array. Click Next to move to the Create Logical Drive tab.
If a logical drives exists on the array, you have two options:
Leave the existing logical drives unchanged.
Add one new logical drive.
Go to the Create Logical Drive tab if you wish to create a new logical drive. See Figure 65 Manual Storage
Configuration: Create Logical Drive Tab on page 95 for detailed configuration information.
Click Next to go to the Summary tab and click on the Finish button to complete the expansion of the array.
Note: When expanding an array, you cannot create a new array, but you can create a new single logical drive during
the same session. You cannot expand the capacity of any existing logical drives during this session.
5.9 Deleting an Array
This feature allows you to delete one or more Arrays for the purpose of rearranging your storage space.
It is recommended that you back up all of your user data on your arrays.
You must first delete all of the logical drives in the array, see 5.7 Deleting a Logical Drive on page 101.