User Guide

Chapter 4 RAID Configurations48
Setting the Enclosure ID
Each of the fourteen disk drive slots of the Altos S700Altos S700 Series
has a unique identifier assigned to it. This identifier is assigned using a
combination of the Slot number and the enclosure ID.
The enclosure ID is set, using the enclosure ID switch, located on the
rear of the Altos S700 (see Figure 4-4).
Note: The enclosure ID must be set prior to powering on the
enclosure.
Note: Each enclosure must have a separate ID when daisy chained
together.
Figure 4-4 Location of Enclosure ID Switch
This enclosure ID switch can be set to 0 through 7.
1
2
1
2
0
I
0
I
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Enclosure ID
Switch
1