User Guide

Rail Kit Installation Instructions

Before an enclosure can be installed in an equipment rack,

the rail kit must be fitted to the equipment rack. The

following procedures describe how to fit the rail kit and

install the enclosure.

Rail Kit Contents The rail kit should contain the following components:

2 x Front Rails

2 x Rear Rails #1 (long)

4 x Phillips SEMS Head Screw

10-32 x .31LG

8 x Phillips Flat Head Screws

10 - 32 x .50LG

2 x Phillips Truss Head Screws

10 - 32 x .75LG

8 x Conical Washer #10

2 x Rear Rails #2 (short)