User Guide

Altos RAIDWatch User Guide
82
6.8 Communication
To be able to configure the Communication settings, select the Communication tab, as shown in
Figure 6–15, from the Configuration View Window Tabs.
• TCP/IP: To set the TCP/IP settings, select the
TCP/IP tab.
• Network Hardware MAC: A DHCP client identifies itself to the server using its network
hardware (MAC) address. See Figure 6–16.
• Set IP Address: IP settings are shown in Figure 6–17.
– IP Assignment: Select any of the following options: Static, DHCP, BOOTP, RARP, or NONE.
– IP Address: Input the IP Address assigned to the subsystem.
– Subnet Mask: Enter a Subnet Mask that will be used by the subsystem e.g. 255.255.0.0.
– Default Gateway: Enter the default value into this field e.g. 192.168.1.254.
• RS232 Port: To set the RS-232 serial port settings, select the RS-232 tab.
• COM Port Select: Select the serial port that will be used for serial port connection. please refer
to Figure 6–18.
Figure 6–15 Select the Communication Tab
Figure 6–16 Setting the Network Hardware MAC
Figure 6–17 Set IP Address