User Guide

Controller Configuration
79
6.6 RAID
To be able to configure the Disk Array parameters, select the “RAID” tab, as shown in Figure 6–8,
from the Configuration View Window Tabs.
• Disk Array Parameters (choose from each range as shown in Figure 6–9):
• LD Rebuild Priority. Available selections: Low, Normal, Improved, High.
• Write Verify On LD Initialization. Choose Enabled or Disabled.
• Write Verify On LD Rebuild. Choose Enabled or Disabled.
• Write Verify On Normal Drives Access. Choose Enabled or Disabled.
6.7 Controller
To be able to view and configure the Controller parameters, select the “Controller ” tab, as shown
in Figure 6–10 from the
Configuration View Window Tabs.
Figure 6–8 Select the RAID Tab
Figure 6–9 Disk Array Parameters
Figure 6–10 Select the Controller Tab