User Guide

Altos RAIDWatch User Guide
56
4.5.3 Tool Bar
Altos RAIDWatch Manager provides a toolbar located just beneath the menu bar for displaying key
command buttons. These buttons serve various purposes, which are described in detail in this
section.
4.5.4 Common Commands
The following commands appear both in the Navigation Menus described in Section4.5.2 and the
Tool Bar described in section 4.5.3.
• The Connect command button is used for connecting to a disk array system. This button has
the same function as the Connect command under the File menu.
Note Multiple simultaneous Altos RAIDWatch Manager connects to one Secondary agent is not a
supported function.
•The Disconnect command button is used for disconnecting from a disk array system. This
button has the same function as the Disconnect command under the File menu. (Note that
Disconnect does not close Altos RAIDWatch Manager.)
•The Enclosure command button displays the Enclosure window for displaying and configuring
custom enclosures. This button provides the same function as the Enclosure command under
the Open menu.
•The RAID View command button displays the configuration and control window for the
controller and drives. This button provides the same function as the RAID View command
under the Open menu.
•The Event Log command button opens the Event Log window for displaying the array event
log. This button provides the same function as the Event Log command under the Open menu.
•The Statistics command button displays the Statistics window for viewing activity (Cache hits
or Read/Write) on the disk array system. This button provides the same function as the Statistics
command under the Open menu.
•The Tile command button arranges the displayed windows by giving each an equal share of
the available application window space. This button has the same function as the Tile In-
Window command under the View menu. (Note: The Tile In-Sequence function listed under
View is not currently available.)
Figure 4–9 Tool Bar