User Guide

Altos RAIDWatch User Guide
32
2 If you are using Windows, first selecting “Start” then opening the “Programs” menu and finally
opening the default menu can easily access the configuration panel. Once the default directory has
been successfully opened select the configure option.
3 Once “Configure” has been selected, the “Configuration Panel”, shown in Figure 3–1 will appear.
Users can configure the following Items:
• Primary Agent
• Secondary Agent
• Notification Processing Center (NPC)
3.2.2 Using Web Browser – Altos RAIDWatch Installed as
Applet
If, during the installation process outlined in Chapter 3 on page 31, the “Applet Only” option was
selected, the Altos RAIDWatch GUI must be accessed through a web browser. To access the
configuration panel shown in Figure 3–2, type in the controller IP address (see Section 2.4.5 on
page 22) followed by “configure.htm.” i.e. if the controller IP Address is ww.xx.yy.zz, in the address
line of the web browser type:
http://ww.xx.yy.zz/configure.htm
The screen shown in Figure 3–2 will appear.
Figure 3–1 In-Band Configuration Panel