User Guide

Installation
21
4 If the “Next” button from Figure 2–7 was selected, the Install Active window shown in Figure 2–8
will appear. If you wish to stop the installation procedure, then click the “Stop” button. If you wish
to continue installing the In-Band components, allow the installation shield to continue the
installation process uninterrupted.
5 Once the
In-Band components have been successfully installed, a window indicating the successful
installation, shown in Figure 2–9, will appear. To complete the process and to make the window
disappear, click on the “OK” button.
Figure 2–8 Installing Active