User Guide

Command Summary
175
Event Monitor About Menu Commands
A.3 Command Buttons
This section describes the various command buttons provided to facilitate execution of commonly
used commands. These buttons are on the toolbar.
Table A–4 Event Monitor Connect Menu Commands
Command Description
Open <O
> Connects Event Monitor to a particular disk array system.
Close <C> Disconnects Event Monitor from a particular disk array system.
Altos
RAIDWatch
<R
>
When a disk array IP address is selected, this command opens the Altos RAIDWatch
Manager application.
Exit <E
> Closes the Event Monitor application.
Table A–5
Command Description
Help <H
> Displays on-line help.
About <A> Displays information about the Event Monitor program.
Table A–6 Command Buttons
Command
Button
Description
Connect Connects Altos RAIDWatch Manager to a particular disk array system for
management. This command has the same function as the Connect command
in the File menu.
Disconnect Disconnects from the current disk array system, terminating the current
management session with the device but not exiting Altos RAIDWatch
Manager. This command has the same function as the Disconnect command in
the File menu.
Enclosure Displays the Enclosure window. This button has the same function as the
Enclosure command in the Open menu.
RAID View Displays the main RAID View window. This button has the same function as the
RAID View command in the Open menu.
Event Log Displays the Event Log window. This button has the same function as the Event
Log command found in the Open menu.