User Guide

LUN Mappimg
127
7 From the LUN Selected drop-box shown in Figure 9–15, choose the LUN ID to assign. Only unused
IDs will be listed.
8 Next, double-click on the icon of the partition you would like to map. The partition should appear,
as shown in Figure 9–16, in the Partition Selected box. Click OK and enter the password when
prompted.
9 To map additional partitions, repeat step 7and 8 listed above.
10 Once all partitions have been mapped, if you choose the LUN Table tab as shown in Figure 9–17,
the newly mapped LUNs should appear in the LUN table.
Figure 9–14 LD partitions
Figure 9–15 Selecting LUN ID
Figure 9–16 Selected Partition