User Guide

LUN Mappimg
125
7 From the LUN Selected drop-box in Figure 9–8, choose the LUN ID that will be assigned to the LD
(or LV). Only unused IDs will be listed.
8 Next, click on the partition 0 icon. “Partition 0” should appear, as shown in Figure 9–9, in the
Partition Selected box. Click OK and enter the password when prompted.
9 If you choose the LUN Table, the newly mapped LUN should now be listed, as seen in Figure 9–10.
:
9.2.2 Map a logical drive or volume partition to a host LUN
1 First, partition the logical drive or logical volume.
2 Follow the steps listed in section 9.2.1 above to access the LUN Map Table shown in Figure 9–3.
3 Select the LUN Mapping tab shown at the top of the LUN Map Table. A new screen will appear in
the content window. From this screen first select the Add sub-tab, and then click on the LUN sub-
tab. (See Figure 9–11).
Figure 9–8 Available LUNs
Figure 9–9 Partitioned Selected
Figure 9–10 Listed LUN Mapping