User Guide

53 Altos R910 Installation Configuration Guide
hardware RAID 3\
Onboard LSI 1030
SCSI controller
3.02.62suse Built-in
Onboard Broadcom
BCM5704 Gigabit
Ethernet
3.37 Built-in
Onboard USB 2.0 N/A Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for integrated SAS hardware RAID and onboard LSI
SCSI can be found in the EasyBUILD 7.1 build 300 (or later).
Software Version Directory on EasyBUILD
Intel RAID Web
Console 2
1.13-07 \app\r910\Integrated_SAS\Linux\
CIM Browser for
Linux
3.06.01 \app\r910\scsi\CIMBrowser\Linux\
Configuring integrated SAS hardware RAID
Please refer to the Appendix B. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID in the SUSE
Linux Enterprise Server 9 Service Pack 3. You need an external USB floppy drive
for applying driver during the OS installation.
1. Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
integrated SAS hardware RAID, you need to make a driver diskette from
the EasyBUILD 7.1 build 300 first before the installation.
2. Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
bootable CD.
3. When you see the boot menu on the screen, select Installation, press F6
then press Enter to continue.
4. Follow the instruction to load the integrated SAS hardware RAID driver
from the driver diskette.
5. Follow the instructions to change the installation and service pack CDs
during the installation. And follow the normal installation procedure to
complete the installation.
Intel RAID Web Console 2 Installation
1. You can find the Intel RAID Web Console 2 in EasyBUILD 7.1 build 300.
Please refer to Software Required section for the directory of the Intel