User Guide

Altos R910 Installation Configuration Guide 52
Software Required
The management utility for onboard LSI SCSI can be found in the EasyBUILD 7.1
build 100 (or later).
Software Version Directory on EasyBUILD
CIM Browser for
Linux
3.06.01 \app\r910\scsi\CIMBrowser\Linux\
Installation Tips
1. Since the SuSE Linux Enterprise Server 9.0 SP3 could detected the
integrated SCSI hardware RAID automatically, just boot the system form
SuSE Linux Enterprise Server 9 Service Pack3 bootable CD.
2. When you see the boot menu on the screen, select Installation to
continue.
3. Follow the instructions to change the installation and service pack CDs
during the installation. And follow the normal installation procedure to
complete the installation.
CIM Browser Installation
1. Insert the EasyBUILD 7.1 b100 and open the folder
/app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm on DVD.
2. Execute install.bin in /app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm of
EasyBUILD 7.1 build 100. It will launch the graphic installation wizard.
3. Follow the instruction and use the default setting to complete the
installation.
4. Launch the CIM Browser.
# /usr/local/bin/LSICim/CIMLSIBroser
SUSE Linux Enterprise Server 9 Service Pack 3 Installation (with
Integrated SAS Hardware RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R910 with integrated SAS hardware RAID.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device Version Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
N/A Built-in
Onboard Intel
E8501 Chipset
N/A Built-in
Integrated SAS 00.00.03.01 \Disk\r910\raid\Integrated_SAS\sles9sp