User Guide

Altos R910 Installation Configuration Guide 46
BCM5704 Gigabit
Ethernet
Onboard USB 2.0 N/A Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for integrated SAS hardware RAID can be found in the
EasyBUILD 7.1 build 600 (or later).
Software Version Directory on EasyBUILD
Intel RAID Web
Console 2
1.19-00 \app\r910\Integrated_SAS\Linux\
Configuring integrated SAS hardware RAID
Please refer to the Appendix B. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. The Integrated SAS hardware RAID driver is required for the SUSE Linux
Enterprise Server 10. You need an external USB floppy drive for applying driver
during the OS installation.
1. Please make the driver diskette from the EasyBUILD 7.1 build 600 first
before the installation.
2. Boot the system form SUSE Linux Enterprise Server 10 bootable CD.
3. When you see the boot menu on the screen, press F5 and select Yes.
4. Please insert the driver disk into the floppy drive then press Enter to
continue the installation.
5. Follow the instruction to complete the installation.
Intel RAID Web Console 2 Installation
1. You can find the Intel RAID Web Console 2 in EasyBUILD 7.1 build 600.
Please refer to Software Required section for the directory of the Intel
RAID Web Console 2 on EasyBUILD and copy the utility from the
EasyBUILD 7.1 build 600 to HDD first.
# cp –R /media/EBV71B600/app/r910/Integrated_SAS/Linux/. /tmp
2. Install Intel RAID Web Console 2 utility
# cd /tmp
# ./install.sh
3. Type y to accept the license agreement and select 3 for StandAlone
installation.