User Guide

37 Altos R910 Installation Configuration Guide
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 Installation, the following device
drivers are required.
Device Version Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
N/A Built-in
Onboard Intel
E8501 Chipset
N/A Built-in
Onboard LSI 1030
SCSI Controller
3.02.62.01rh Built-in
Onboard Broadcom
BCM5704 Gigabit
Ethernet
3.43-rh Built-in
Onboard USB 2.0 N/A Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for onboard LSI SCSI can be found in the EasyBUILD 7.1
build 100 (or later).
Software Version Directory on EasyBUILD
CIM Browser for
Linux
3.06.01 \app\r910\scsi\CIMBrowser\Linux\
Installation Tips
Since Red Hat Enterprise Linux 4.0 Update 3 can detect the onboard LSI SCSI
automatically, you can just boot the system with Red Hat Enterprise Linux OS
installation CD and follow the instruction to do the installation.
CIM Browser Installation
1. Insert the EasyBUILD 7.1 b100 and open the folder
/app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm on DVD.
2. Execute install.bin in /app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm of
EasyBUILD 7.1 build 100 from a terminal. It will launch the graphic
installation wizard.
# ./install.bin
3. Follow the instruction and use the default setting to complete the
installation.
4. Launch the CIM Browser.
# /usr/local/bin/LSICim/CIMLSIBroser