User Guide

19 Altos R910 Installation Configuration Guide
7. Follow the instruction to complete the installation.
8. For using the Intel RAID Web Console Utility, please launch the web
browser and link to http://localhost:3570.
Broadcom Advanced Control Suite Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R910 -> Broadcom Ethernet Adapter, select BACS
Utility (Windows Server 2003) and click on Setup.
3. Follow the instruction and use the default setting to complete the
Broadcom Advanced Control Suite installation.
Windows Server 2003 Enterprise Edition (with onboard LSI SCSI)
Below information describes how to manually install Windows Server 2003
Enterprise Edition on Altos R910 with onboard LSI SCSI.
Drivers Required
For Windows Server 2003 Installation, the following device drivers are required.
Device Version Directory on EasyBUILD
Onboard VGA 6.14.10.6553 \Disk\R910\onboard\VGA
Onboard Intel
E8501 Chipset
5.2.3790.1380 Built-in
Onboard LSI 1030
SCSI controller
1.09.11.0 \Disk\R910\onboard\SCSI\LSI\ultra320.n
et
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.48.0.0 \Disk\R910\NIC\BCM\ws2003
Onboard USB 2.0 5.2.3790.1380 Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for onboard LSI 1030 SCSI controller and NIC can be
found in the EasyBUILD 7.1 build 100 (or later).
Software Version Directory on EasyBUILD
CIM Browser for
Windows
3.05.00 \app\r910\SCSI\CIMBrowser\Windows\W
indows\VM
Broadcom
Advanced Control
Suite
7.7.6 \app\r910\NIC\BACS\2KXPWS03
Installation Tips
NOTE. You need an USB floppy for applying driver during the OS installation.
1. Although there is built-in drive for onboard LSI SCSI in the OS, please use