User Guide

11 Altos R910 Installation Configuration Guide
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device Version Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
6.14.10.6553 \Disk\R910\onboard\VGA
Onboard Intel
E8501 Chipset
5.2.3790.1380 Built-in
Onboard LSI 1030
SCSI controller
5.2.3790.1380 Built-in
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.48.0.0 \Disk\r910\nic\bcm\WS2003X64\
Onboard USB 2.0 5.2.3790.1380 Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for onboard LSI 1030 SCSI controller and NIC can be
found in the EasyBUILD 7.1 build 100 (or later).
Software Version Directory on EasyBUILD
CIM Browser for
Windows
3.05.00 \app\r910\SCSI\CIMBrowser\x64\WS2003
\Windows\VM\
Broadcom
Advanced Control
Suite
7.7.7 \app\r910\NIC\BACS\WS3XPx64\
Installation Tips
The driver for LSI Logic 22320-R SCSI card is built-in in Windows Server 2003
Enterprise x64 Edition installation CD. Just boot the system form the Windows
Server 2003 Enterprise x64 Edition CD and follow the normal installation
procedure to complete the installation.
VGA Driver Installation
The VGA driver installation is the same as integrated SCSI hardware RAID
enabled. Please refer to the Windows Server 2003 Enterprise x64 Edition (with
Integrated SCSI Hardware RAID) VGA Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver installation is the same as integrated SCSI hardware
RAID enabled. Please refer to the Windows Server 2003 Enterprise x64 Edition
(with Integrated SCSI Hardware RAID) Gigabit Ethernet Driver Installation
section.