User Guide

9 Altos R910 Installation Configuration Guide
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.48.0.0 \Disk\r910\nic\bcm\WS2003X64\
Onboard USB 2.0 5.2.3790.1380 Built-in
Hot-swap
backplane
N/A Built-in
Software Required
The management utility for integrated SCSI hardware RAID and NIC can be
found in the EasyBUILD 7.1 build 100 (or later)
Software Version Directory on EasyBUILD
Intel RAID Web
Console
2.8-00 \app\R910\romb\IntelRAIDWebConsol
e\Windows
Broadcom
Advanced Control
Suite
7.7.7 \app\r910\NIC\BACS\WS3XPx64\
Configuring Integrated SCSI Hardware RAID
Please refer to the Appendix A. for the Integrated SCSI hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver for integrated SCSI hardware RAID in the OS.
You need an USB floppy for applying driver during the OS installation.
1. As Windows Server 2003 x64 can’t recognize the integrated SCSI
hardware RAID, you need to make a driver diskette from the EasyBUILD
7.1 build 100 first before the installation.
2. Press F6 at the start of installation to provide the driver diskette.
3. Select “Intel (R) RAID Controller SROMBU42E” as target driver
4. After loading the RAID driver from diskette, follow the normal procedure
to finish the installation.
VGA Driver Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Drivers -> Altos R910 -> Graphics adapters -> ATI Radeon, select
Windows Server 2003 x64 and click on Setup.
3. Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
Gigabit Ethernet Driver Installation
Although the Windows Server 2003 x64 Enterprise Edition could detect the
onboard Broadcom Gigabit Ethernet automatically, we still replace the driver
with the one in the EasyBUILD 7.1 build 300 DVD.