User Guide

Altos R910 Installation Configuration Guide 2
Model Altos R910
Processor Up to four Intel Xeon MP processors at 2.66GHz or
above
Front Side Bus 800/667 MHz
Cache 2 x 2M L2 cache
Chipset Intel chipset
• Intel E8501 North Bridge
• Intel E8500 Chipset eXtended Memory Bridge
(XMB)
• Intel IOP332 Storage I/O Processor
• Intel 82801EB I/O Controller Hub (ICH5)
• Intel 6700 PXH 64-bit Hub
Memory
• Four memory boards, four DIMM sockets per
board. Support 512MB/1GB/2GB/4GB DDR2-
400 registered with ECC
• Maximum memory of 64GB
• Dual DDR2 channels per board
• PCI Express x16 connect to server board
Storage Interface
• Two Ultra 320 SCSI ports
• One SATA port
• Optional Integrated Hardware RAID support
RAID 0, 1, 10, 5, 50
• Integrated SAS support (SAS SKU)
• Optional Integrated SAS Hardware RAID
support RAID 0, 1, 10, 5, 50 (SAS SKU)
Expansion Slots
• One PCI-X 64-bit/133MHz slot
• Two PCI-X 64-bit/100MHz slots
• One x8 PCI-Express slot
• Three x8 PCI-Express slots (w/ x4 throughput)
VGA
• Onboard ATI Radeon 7000 video controller w/
16MB SDRAM
SATA Controller
• One SATA port
SCSI Controller LSI 1030Dual Channel Ultra 320 SCSI
RAID on Motherboard Integrated SCSI Hardware RAID (optional)
• Support RAID 0, 1, 10, 5, 10
SAS Controller LSI SAS 1068 8-port controller (SAS SKU)
SAS RAID Controller Integrated SAS hardware RAID (optional) (SAS
SKU)
• Support RAID 0, 1, 10, 5, 50
LAN Controller
• Onboard Broadcom BCM5704C Dual port
Gigabit Ethernet Controller
BMC Default: Acer BMC module
HARDWARE
SPECIFICATION