User Guide

33 Altos R720 Installation Configuration Guide
Device Version Directory on EasyBUILD
Integrated SAS
RAID
1.00.07 \Disk\R720\RAID\Integrated_SAS\NW6.
5\
Onboard Intel
5000P Chipset
N/A OS built-in
Onboard Intel
82563EB Gigabit
Ethernet
9.22 \Disk\R720\NIC\Intel\pro1000.nw
Onboard ATI
ES1000
N/A OS built-in
Onboard USB 2.0 N/A OS built-in
Installation Tips
NOTE. You need to apply the integrated SAS RAID and NIC driver during the
installation. If you do not have the optional internal USB floppy drive, you
need an external USB floppy drive.
1. Make a driver diskette for integrated SAS RAID and onboard Intel
82563EB Gigabit Ethernet from EasyBUILD 7.1 build 100.
2. Boot the system from the NetWare 6.5 SP5 OS CD.
3. At Welcome to the NetWare 6.5 server installation page, select Manual to
install.
4. At Prepare boot partition page, create one 500 MB DOS partition.
5. When you see the following message, please select Modify. Then, move
the cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
----------------------- --------------
Storage adapters: IDEATA, IDEATA, MEGA_SAS
6. Please press Delete to delete MEGA_SAS.HAM modules
7. Then, press INSERT key to insert the integrated SAS RAID driver. After the
drivers are successfully loaded, please select Return to driver summary.
8. Continue the installation.
9. When you see the following message, please select Modify. Then, move
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as