User Guide

15 Altos R720 Installation Configuration Guide

Advanced Server SP4 on Altos R720 with integrated SAS RAID.

Drivers Required

For Windows 2000 Installation, the following device drivers are required.

Device Version Directory on EasyBUILD

Integrated SAS

RAID

1.17.0.32 \Disk\R720\RAID\Integrated_SAS\W2K

Onboard Intel

5000P Chipset

7.3.0.1011 \Disk\R720\onboard\Chipset\

Onboard Intel

82563EB Gigabit

Ethernet

9.3.39 \Disk\R720\NIC\Intel\pro1000.net\ws03

2k\

Onboard ATI

ES1000

8.24.3 \Disk\R720\onboard\VGA\W2K\

Onboard USB 2.0 5.0.2195.6717 OS built-in

IOAT 1.2.52.0 \Disk\R720\onboard\IOAT\WS2K3

Hot-swap

backplane

5.0.6055.2 \Disk\R720\onboard\Backplane\Windo

Software Required

The management utility of integrated SAS RAID can be found in the EasyBUILD

7.1 build 100 (or later).

Software Version Directory on EasyBUILD

Intel RAID Web

Console

1.13-00 \APP\R720\RAID\Integrated_SAS\Windo

Intel PROSet Utility 10.4.4.2 \APP\R720\NIC\PROSETDX\2KXWS03\

Configuring integrated SAS RAID

Please refer to the Appendix A. for the integrated SAS RAID configuration.

Installation Tips

NOTE. There is no built-in driver Integrated SAS RAID in the Windows Server

2003. If you do not have the optional internal USB floppy drive, you need an

external USB floppy drive for applying driver during the OS installation.

1. As Windows 2000 can’t recognize the integrated SAS RAID, you need to

make a driver diskette from the EasyBUILD 7.1 build 100 first before the

installation.

2. Press F6 at the start of installation to provide the driver disk for the

onboard ROMB.

3. Select “Intel(R) SAS RAID Controller Driver (Windows 2000)” as target

driver

4. After loading the driver from diskette, follow the normal procedure to

finish the installation.