User Guide

System Housing 2-3
# Item Description
1 LCD Display Screen Indicates boot status as well as any
BIOS check point errors encountered
upon system initialization. Refer to
section 2.1.3 for more information.
2 3.5-inch Diskette
Drive
A 3.5-inch diskette drive comes with
the basic system.
3 CD-ROM Drive Also a SCSI CD-ROM drive comes
with the basic system.
4 5.25-inch Drive Bays Two empty 5.25-inch drive bays allow
installation of additional devices.
5 Ventilation Exhausts heat built-up inside the
housing.
6 SCSI HDD Bays Eight empty SCSI HDD bays allow
installation of hot-swap SCSI drives.
7 Power Switch The power switch turns the system on.
8 System Power LED Lights up (green) when the power is
on. This also denotes that the system
is running on a good supply of AC
power.
9 System HDD Access
LED
Lights up (green) when at least one of
the hard disks is currently accessing.
10 RDM Active LED Lights up (yellow) when an error
condition occurs in the system.
11 SCSI HDD Power
Status
Lights up (green) when the HDD is
connected and ready to go.
12 SCSI HDD Busy Lights up when the HDD is currently
accessing.
13 SCSI HDD Failure Lights up (orange) when the HDD
installed on the backplane board is
bad.