User Guide

3-40 AcerAltos 19000Pro4 System Guide
3.3.6 Reconfiguring the System
You must enter Setup after installing or removing SIMMs to
reconfigure the system.
Follow these steps to reconfigure the system:
1. Turn the system on. A memory error message appears,
indicating that the total memory does not match the value stored
in CMOS.
2. Press + + to enter Setup. A warning message
appears indicating an incorrect memory configuration.
3. Press twice to exit and reboot the system.
The system boots with the new memory configuration.
For some operating systems, it may be
necessary to run the EISA Configuration
Utility after changing the memory size.
Please refer to the documentation that
comes with the operating system.