User Guide

Chapter
22
Setting Up the System
Setting Up the System 2-1
This chapter tells how to install and set up the system. It gives
instructions on how to select a site for the system, prepare the system
for use, connect basic peripherals, and start up the system.
2.1 Pre-installation Requirements
2.1.1 Selecting a Site
Before unpacking and installing the system, select a suitable site for
the system for maximum efficiency. The system is suitable to set up
in an office environment.
Consider the following factors when choosing a site for the system:
• Near a grounded power outlet
• Clean and dust-free
• Sturdy surface free from vibration
• Well-ventilated and away from sources of heat
• Secluded from electromagnetic fields produced by electrical
devices such as air conditioners, radio and TV transmitters, etc.