User Guide

BIOS Utility 4-23
4.6.2 PnP/PCI System Configuration
The PnP/PCI System Configuration allows you to specify the settings
for your PCI devices. Selecting this option displays the following
screen.
PnP/PCI System Configuration Page 1/1
PCI IRQ Setting ...........[ Auto ]
INTA INTB INTC INTD
PCI Slot 1 .............. [--] [--] [--] [--]
PCI Slot 2 .............. [--] [--] [--] [--]
PCI Slot 3 .............. [--] [--] [--] [--]
PCI Slot 4 .............. [--] [--] [--] [--]
PCI Slot 5 .............. [--] [--] [--] [11]
PCI Slot 6 .............. [--] [--] [11] [--]
PCI Slot 7 .............. [--] [11] [--] [--]
PCI OB SCSI1 ............ [11]
PCI OB SCSI2 ............ [11]
PCI IRQ Sharing ............[No]
VGA Palette Snoop ..........[Disabled]
↑↓ = Move Highlight Bar, ← → = Change Setting, F1 = Help
PCI IRQ Setting
This function is fixed at Auto setting and is nonconfigurable. It
automatically configures the plug-and-play (PnP) devices installed in
your system.
Refer to your manual for technical information about the PCI card.
PCI SLOTS
These parameters specify the auto-assigned interrupt for each of the
PCI devices. Like the PCI IRQ Setting parameter, these are also
nonconfigurable.