User Guide

4-18 AcerAltos 19000Pro4 System Guide
Onboard Devices Configuration Page 2/2
Onboard Floppy Disk Controller ......[Enabled ]
Onboard IDE Primary Channel .........[Enabled ]
Onboard PS/2 Mouse (IRQ 12) .........[Enabled ]
Onboard SCSI1 .......................[Enabled ]
Boot from SCSI1 Device ...........[Enabled ]
OnboardSCSI2 ........................[Enabled ]
Boot from SCSI2 Device ...........[Enabled ]
Onboard Ethernet Chip ...............[Enabled ]
↑↓ = Move Highlight Bar, ← → = Change Setting, F1 = Help
PgUp/PgDn = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1.
BASE ADDRESS
This function lets you set a logical base address for serial port 1. The
options are:
• 3F8h
• 2F8h
• 3E8h
• 2E8h
IRQ
This function lets you assign an interrupt for serial port 1. The options
are IRQ 3 and 4.
The Base Address and IRQ parameters are
configurable only if Serial Port 1 is enabled.