User Guide

4-10 AcerAltos 19000Pro4 System Guide
IDE Primary Channel Master Page 1/1
Type.................................. [Auto]
Cylinder .......................... [ ]
Head .............................. [ ]
Sector ............................ [ ]
Size .............................. [ ] MB
Hard Disk Block Mode ................. [Auto]
Hard Disk Size > 504MB ............... [Auto]
Hard Disk 32 Bit Access .............. [Disabled]
↑↓ = Move Highlight Bar, ← → = Change Setting, F1 = Help
The parameters for the IDE Primary Channel Slave menu are the
same as in the above screen.
4.4.1 Floppy Drives
To configure the first floppy drive (drive A), highlight the Floppy Drive
A parameter. Press or key to view the options, then select the
appropriate value.
Possible settings for the Floppy Drive parameters:
• [ None ]
• [360 KB, 5.25-inch]
• [1.2 MB, 5.25-inch]
• [720 KB, 3.5-inch]
• [1.44 MB, 3.5-inch]
• [2.88 MB, 3.5-inch]
Follow the same procedure to configure floppy drive B. Choose None
if you do not have a second floppy drive.