User Guide

BIOS Utility 4-3
4.2 System Information
The following screen appears if you select System Information from
the main menu.
System Information Page 1/1
Processor ................. Pentium Pro
Processor Speed ........... xxx MHz
Bus Frequency ............. xx MHz
Internal Cache ............ xx KB, Enabled
External Cache ............ xxx KB, Enabled
Floppy Drive A ............ x.xx MB, x.x-inch
Floppy Drive B ............ None
IDE Primary Channel Master . Hard Disk, xxx MB
IDE Primary Channel Slave .. None
Total Memory .............. xx MB
Serial Port 1 ............. 3F8h, IRQ 4
Serial Port 2 ............. 2E8h, IRQ 3
Parallel Port ............. 378h, IRQ 7
Pointing Device ........... None
Note: New values after change will not be displayed until
next reboot
PgUp PgDn = Move Screen, Esc = Back to Main Menu
The System Information menu shows the current basic configuration
of your system.
The command line at the bottom of the menu tells you how to move
from one screen to another and return to the main menu.
Press to move to the next page or to return to the previous
page.
Press to return to the main menu.