User's Manual

Table Of Contents

English

Under the Hot Keys tab, check to see if the Hot Keys are enabled. The Hot Keys

must be enabled for the G-sensor to function properly.

Note: G-sensor is active only in tablet mode. Not all applications

will display properly under portrait mode.

Pen-Mode and Finger-Mode

Your computer has a stylus that is stored in the lower right-hand side of the

screen.

While Pen-Mode is active, your computer will only react to the stylus. This

oids inadvertently moving the cursor when your hand touches the screen

while you are in tablet mode.

A pop-up dialog will ask if you want to enable Pen-Mode or Finger-Mode when

laun

ching supported programs.

Note: You may only use the stylus in Pen-Mode.

Calibrating your screen

You may find that you need to recalibrate the screen if it does not react

properly to input when in tablet mode. To do this click Start > Control Panel >

Hardware and Sound > Tablet PC Settings. On the Display tab, select Calibrate.

Using the stylus, follow the instructions to tap the screen on the crosshairs

displayed.