User`s manual

Am486
®
Microprocessor PCI Customer Development Platform User’s Manual
1-2
Setting Up the PCI CDP
CAUTION: As with all computer equipment, the PCI CDP may
be damaged by electrostatic discharge (ESD). Please take proper
ESD precautions when handling any board.
Warning: Read before using this development platform
Before applying power, the following precautions should be taken to avoid damage
or misuse of the board:
• Make sure power supply connectors (from a standard AT system power supply)
are plugged onto the board correctly. The grounds (usually black wires) must
meet at the center of the two power supply connectors on the board. See “Power
Supply Connectors (N2 and P2)” on page 2-33.
• See Figure 2-3 on page 2-5 for connector positions.
• Check the diskette that was shipped with your kit for README or errata
documentation. Read all the information carefully before continuing.
For current application notes and technical bulletins, see the AMD World Wide
Web page at www.amd.com and follow the link to Embedded Systems.
!