Specifications

50 PCA-6143P User's Manual
åI/O address selection (SW1)
Positions 1 and 2 on DIP switch SW1 control the disk's I/O
address.
Position 1 Position 2 I/O address (HEX)
Off Off Disabled
Off On 200-201
On Off 240-241
On On 280-281
å
Memory address selection (SW1)
Positions 3 and 4 on SW1 control the Flash/ROM disk’s memory
address. If you select "Disabled", the disk will not function.
Position 3 Position 4 Memory address (HEX)
Off Off Disabled
Off On D2000 to D3FFF
On Off D6000 to D7FFF
On On DA000 to DBFFF
åDrive emulated (SW1)
Positions 5 and 6 of SW1 control the DOS drive emulated by the
Flash/RAM/ROM disk: 1st, 2nd, 3rd or 4th.
Position 5 Position 6 Drive
Off Off 4th
Off On 3rd
On Off 2nd
On On 1st
The actual drive letter assigned by DOS to the Flash/RAM/ROM
disk depends on the floppy or hard disks installed in the system
and the DOS version.