Specifications

Chapter 1 Hardware Configuration 7
Number Function Page
CN1 HDD connector 16
CN2 FDD connector 15
CN3 Parallel/printer connector 16
CN4,CN5 PC/104 connectors 61
COM1 RS-232 serial port 20
COM2 RS-232/422/485 serial port 21
SIMM memory modules
On the left end of the card (away from the mounting bracket) are the
two SIMM (Single In-line Memory Module) sockets which hold the
card’s DRAM memory. If you ordered DRAM SIMMs along with
your card, the SIMMs may already be installed. If not, you should
install them as described in Appendix C.
Flash/RAM/ROM disk
At the right of the card are three 32-pin sockets which hold the
memory chips for the card's Flash/RAM/ROM disk. Instructions for
installing memory chips appear in Appendix A.