Specifications

92 PCA-6143P User's Manual
84 Lock-key checking over.
About to check for memory size mismatch with CMOS.
85 Memory size check done.
About to display soft error and check for password or
bypass setup.
86 Password checked.
About to do programming before setup.
87 Programming before setup complete.
Going to CMOS setup program.
88 Returned from CMOS setup program and screen is cleared.
About to do programming after setup.
89 Programming after setup complete.
Going to display power on screen message.
8A First screen message displayed.
About to display WAIT... message.
8B WAIT... message displayed.
8C Main and Video BIOS shadow successful.
Setup options programming after CMOS setup about to
start.
8D Setup options are programmed
8E Mouse check and initialization complete.
Going for hard disk
8F Floppy check returns that floppy is to be initialized.
Floppy setup to follow.
90 Floppy setup is over.
Test for hard disk presence to be done.
91 Hard disk presence test over.
Hard disk setup to follow.
92 Hard disk setup complete.
About to go for BIOS ROM data area check.
93 BIOS ROM data area check halfway.
BIOS ROM data area check to be complete.
94 BIOS ROM data area check over.
Going to set base and extended memory size.
95 Memory size adjusted due to mouse support
96 Returned after verifying from display memory.
Going to do any init before C800 optional ROM control.
97 Any init before C800 optional ROM control is over.
Optional ROM check and control will be done next.
98 Optional ROM control is done.About to give control to do any
required processing after optional ROM returns control.