Personal Computer User Manual
Table Of Contents
- System Specifications
- System Utilities
- Machine Disassembly and Replacement
- Disassembly Requirements
- General Information
- External Module Disassembly Process
- Main Unit Disassembly Process
- Main Unit Disassembly Flowchart
- Removing the Switch Cover
- Removing the Keyboard
- Removing the Antenna
- Removing the LCD Module
- Removing the Upper Cover
- Removing the Touch Pad Bracket
- Removing the Finger Print Reader
- Removing the Launch Board
- Removing the Speaker Module
- Removing the Switch Board
- Removing the Touch Pad Board
- Removing the I/O Board
- Removing the Bluetooth module
- Removing the Modem Module
- Removing the Main Board
- Removing the Thermal Module
- Removing the CPU
- Removing the CPU Fan
- Removing the HDMI Module
- LCD Module Disassembly Process
- LCD Module Reassembly Procedure
- Main Module Reassembly Procedure
- Replacing the CPU
- Replacing the Thermal Module
- Replacing the CPU Fan Module
- Replacing the HDMI Module
- Replacing the Mainboard
- Replacing the I/O Board
- Replacing the Bluetooth Board
- Replacing the Modem Module
- Replacing the Finger Print Reader
- Replacing the Touch Pad Bracket
- Replacing the Launch Board
- Replacing the Switch Board
- Replacing the Antenna Cables
- Replacing the Speaker Module
- Replacing the Keyboard
- Replacing the Switch Cover
- Replacing the WLAN Module
- Replacing the Hard Disk Drive Module
- Replacing the DIMM Modules
- Replacing the ODD Module
- Replacing the Lower Covers
- Replacing the Express and SD Card Trays
- Troubleshooting
- Common Problems
- Power On Issue
- No Display Issue
- Random Loss of BIOS Settings
- LCD Failure
- Built-In Keyboard Failure
- Touchpad Failure
- Internal Speaker Failure
- Internal Microphone Failure
- HDD Not Operating Correctly
- ODD Failure
- Modem Function Failure
- Wireless Function Failure
- EasyTouch Button Failure
- Thermal Unit Failure
- External Mouse Failure
- Other Failures
- Intermittent Problems
- Undetermined Problems
- POST Codes Tables
- Common Problems
- Jumper and Connector Locations
- FRU (Field Replaceable Unit) List
- Model Definition and Configuration
- Test Compatible Components
- Online Support Information
- Index
42 Chapter 3
General Information
Pre-disassembly Instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Place the system on a flat, stable surface.
4. Remove the battery pack.
Disassembly Process
The disassembly process is divided into the following stages:
• External module disassembly
• Main unit disassembly
• LCD module disassembly
The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
Screw Quantity Part Number
M2.5*8 (NL) 15 86.AR102.001
M2.5*5 (NL) 22 86.AR102.002
M2*3 (NL) 36 86.AR102.004
M2*6 (NL) 4 86.AR102.007
M2*4-NI (NL) 5 86.AR102.006
M3*3 (NL) 4 86.AR102.009
M2.5*6.5 4 86.AR102.012